Watersnake 24lb Motor Elite Bundle
Items
$269 | $269 | ||
$599 | $599 | ||
FPV-Power PWM 50A with Variable Speed Controller V2 [Delivered]
$170
|
$170 | ||
Salt Attack Salt Remover Trigger Spray 500ml [Delivered]
$29
|
$29 | ||
K2F Bullnose Rudder [Delivered] (Sold Out)
$79
|
$79 | ||
K2F Durable Nylon Block Board Fishing Kayak Trolling Motor Mounting DIY Accessories [Delivered]
$30
|
$30 |
Description
K2F Kayak Outrigger/Stabilizer Kit [Colour: Jungle Camo] [Delivered]
Kayak Outrigger Stabilizer Floats Kit Jungle Camo - Kayaks2Fish
New & Improved 2022 Kayaks2Fish Outrigger Kit
A Kayak outrigger is used to add stability to your sit-on-top kayak and is a great accessory when using your kayak for fishing. Kayak Stabilizer floats allow you to stand up to cast and land your catch an also adds safety when using a trolling motor.
Each float comes with built-in 6-inch storage compartment giving you more space to store your gear.
The double floats are attached towards the rear of the kayak so that they do not impede your paddling stroke. The whole kit can be removed for transport and storage.
Outrigger Kit includes:
- 2 x floats with 6-inch storage hatch
- Connecting aluminium poles
- 2 x side tracks
- Mounting kit with screws & nuts to connect the floats to motor bar mounting position on the back of kayak which is available by default with our current Osprey 9, NG9, NG10, NG10 MKII, Merlin & Triton Kayak. (Additional mounting brackets sold separately for other kayaks that do not have a mounting position on the back)
Float dimensions:
- Length: 100cm
- Width: 22cm
- Depth: 27cm
Available in:
- Jungle Camo
- Grey Camo
- Blue Camo
- Red Camo
- Moss
- Sunset
- Raven
- Sky Blue
- Desert
Please note: Kayaks & electric motor setup shown are not included. The connecting aluminium pole comes with 1 set of pre-drilled holes. Minor modification needed (drilling holes to fit the distance between 2-rod holders) to fit your kayak model.
Black Bear Battery 50AH Battery with 10A Charger [Delivered]
Black Bear Battery 50AH Battery with 10A Charger
Introducing the Black Bear Battery 50AH Battery with 10A Charger - a reliable and robust solution for all your portable power needs. This high-capacity battery is perfect for trolling motors, LEDs, fishfinders, and small electronic devices. With its impressive capacity of 50,000 and maximum amp draw of 60A, you can enjoy extended run times without worrying about running out of power!
Crafted to meet the highest standards in performance and durability, it features a rugged IP67-rated case that ensures protection against water immersion up to one metre deep. The built-in battery management system safeguards against overcharging or discharging while maximising efficiency.
The included heavy-duty aluminium charger provides fast recharges with fuse protection for added safety. With a charging capacity of 10A and an average recharge time of just five hours from empty to full charge, you'll spend less time waiting around and more time enjoying your favourite activities.
Whether on a fishing trip or camping adventure where access to electricity is limited or non-existent, this versatile battery will keep your essential electronics powered throughout the day. And its compact dimensions make it easy to transport wherever you go.
So why wait? Don't let low batteries limit your outdoor experiences. Orders yours today!
Features:
- High Capacity: 50,000mAh ensures long-lasting power for your devices, perfect for extended use.
- Fast Charging: Comes with a 10A charger for quick recharge, getting you back in action in no time.
- Durable Design: The rugged IP67-rated case protects against water, making it ideal for outdoor adventures.
- Safe and Reliable: The built-in battery management system prevents overcharging, ensuring safety and efficiency.
- Versatile Use: Great for powering trolling motors, LEDs, fishfinders, and other small electronic devices.
- Robust Charger: Heavy-duty aluminium charger with fuse protection adds an extra layer of safety.
- Extended Lifecycle: Capable of 800-1000 charge cycles, providing reliable power for a longer time.
- Quick Recharge: Battery recharges fully in just 5 hours, minimising downtime.
- Water Resistance: The IP67 rating means it's resilient in wet conditions, suitable for fishing and boating trips.
Specifications:
- Brand: Black Bear Battery
- SKU: BBB-50AH-10A-V
- MPN: BBB-50AH-10A
- UPC: 680220223306
- Length: 17 cm
- Width: 10 cm
- Height: 17 cm
- Weight: 3.6 kg
- Warranty: 2 Years
- Suitable For: Trolling Motors, LEDs, Fishfinders, Small Electronic Devices
- Capacity: 50,000 mAh
- Run Time (20A Discharge): 2.5 Hours
- Max Amp Draw: 60A
- Max Cycles: 800-1000
- Charger: Aluminum (Heavy Duty)
- Charger with Fuse Protection: Yes
- Charger Capacity: 10A
- Battery Full Recharge Time: 5 Hours
- Case: IP67
- Battery Management System: Yes
Warnings:
- Do not expose to extreme temperatures or water beyond IP67 rating. Improper use may result in injury or damage.
- The manufacturer is not responsible for damages resulting from improper installation, usage, or maintenance.
- Only use the provided charger to avoid damage. Ensure connections are secure before use.
- Keep out of reach of children. If damaged, stop using immediately and consult a professional.
Package Includes:
- 1 x Black Bear Battery 50AH
- 1 x 10A Heavy Duty Aluminum Charger
FPV-Power PWM 50A with Variable Speed Controller V2 [Delivered]
FPV-Power PWM 50A with Variable Speed Controller V2
Introducing the FPV-Power PWM 50A with Variable Speed Controller V2 - your ultimate solution for precise speed control and increased runtime in various applications! This upgraded version of the popular PWM comes packed with features that make it easier than ever to navigate tight spaces, monitor battery levels, and enjoy waterproof connections. With its magnetic kill switch and throttle control dial, this product offers unparalleled convenience.
One key advantage offered by the controller is its ability to increase runtime while maintaining efficiency. Unlike standard motor throttles that pass power through resistors, this pulse width modulation (PWM) controller delivers just enough power needed for desired speeds without wasting excess energy. At full throttle running with or without PWM, there's no difference in efficiency; however, as you lower the throttle setting using the proportional throttle control on a dial, you'll notice significant improvements in increasing overall runtime.
This versatile product caters perfectly to hobbyists who require efficient speed regulation such as drone enthusiasts building their own aerial photography/videography systems or remote-controlled vehicles like RC boats and kayaks seeking longer runtimes during operation!
So why wait? Upgrade your speed control system today by investing in the FPV-Power PWM 50A with Variable Speed Controller V2! With its forward and reverse switch for easy maneuverability even when trolling, voltmeter so you can keep an eye on your battery levels accurately, and waterproof connections instead of anderson plugs - this product offers convenience like no other. Order now!
Features:
- Forward/Reverse Switch: An innovative feature that makes manoeuvring in tight spaces significantly easier.
- Voltmeter: Always stay aware of your battery levels, ensuring uninterrupted use.
- Waterproof Connections: Unlike Anderson plugs, these connections offer superior safety and durability.
- Magnetic Kill Switch: This standard feature offers immediate power cutoff, providing an added layer of safety.
- Throttle Control Dial: Gain precise control over your speed - a real advantage when trolling lures.
- PWM Technology: Pulse Width Modulation allows for increased runtimes by delivering the exact power needed - a clear advantage over standard throttles that pass power through resistors, leading to energy waste.
- Weather and Splash Proof: This product is resilient against weather and splashes. Just remember not to submerge it!
- High Amp Capacity: Can handle a maximum of 50 Amps, making it a powerful accessory for your needs.
Specifications:
- Brand: FPV-Power
- SKU: FPV-50A-PWM-V2-V
- MPN: 10334
- UPC: 5707823482925
- Weight: 965 gm
- Length: 175 mm
- Width: 125 mm
- Height: 75 mm
- Max Amp Capacity: 50 Amps
Package Includes:
- 1 x FPV-Power 50A PWM V2
- 1 x Built-in Voltmeter
- 4 x Waterproof Connections
- 1 x Magnetic Kill Switch
Warning & Disclaimer:
- The PWM box is weather and splash proof only. It should not be submerged in water under any circumstances.
- While the product has waterproof connections, always make sure connections are properly secured before operation to prevent any damage or potential safety hazards.
- The full efficiency benefits of PWM are more evident at lower throttle levels. At full throttle, the difference in efficiency with or without PWM is negligible.
Salt Attack Salt Remover Trigger Spray 500ml [Delivered]
Salt Remover Trigger Spray 500ml - Salt Attack
Removes salt off any surface and designed to be left on to protect metal surfaces with advanced corrosion inhibitors.
Protects:
- Rods
- Reels
- Fishing tackle
- Dive gear
- Marine engines
- Electrical equipment
To be used on any surface that comes into contact with salt spray
K2F Bullnose Rudder [Delivered]
Kayaks2Fish Bullnose Rudder
Introducing the K2F Bullnose Clamp On Rudder, a versatile and reliable accessory to enhance your kayaking or boating experience. Made in the USA from high-quality nylon, this bullnose rudder is designed to give you more control and better steering capabilities on the water.
With its universal mount, this rudder can be easily attached to most electric trolling motors (24 to 55 thrust), making it great as a canoe rudder and suitable for use with various kayaks, boats, pontoons, and more. Attach the rudder directly to the base of the motor using the included stainless steel screws, and you're ready to go in no time!
One of the critical features of this bullnose rudder is its ability to turn quickly when steering, providing better control in the wind and decreasing the need for oars. This means less reliance on oars and more excellent maneuverability on open waters.
If you love spending time outdoors exploring new bodies of water by kayak or boat, the K2F Bullnose Clamp On Rudder is the perfect addition to your gear. It may even mount on shorter motors, making it even more versatile. Experience improved handling abilities in various weather conditions, such as wind gusts, and enjoy your adventures to the fullest! Get yours today!
Features:
- Universal Mount: Compatible with most electric trolling motors (24 to 55 thrust).
- Enhanced Control: Offers better steering and control in various weather conditions.
- Easy Installation: Direct attachment to motor base for quick setup.
- Durable Hardware: Stainless steel screws suitable for both fresh and saltwater.
- Lightweight Design: Weighs only 450 grams, adding minimal weight to your setup.
- Versatile Use: Ideal for canoes, pontoons, and kayaks.
Specifications:
- Brand: Kayaks2Fish
- SKU: K2F-BULLNOSE-RUDDER-V
- MPN: K2F-BULLNOSE-RUDDER-V
- UPC: 680220227113
- Weight: 450 gm
- Material: Impact Plastic
- Colour: Black
- Mounting Type: Transom, Bow
Package Includes:
- 1 x K2F Bullnose Rudder
- Stainless Steel Screws for Installation
Warning & Disclaimer:
- Usage Precaution: Intended for use with compatible trolling motors only.
- Installation Safety: Ensure proper installation to avoid accidents.
- Weather Limitations: Not designed for extreme weather conditions.
- Water Resistance: Not fully waterproof; may not perform in heavy water exposure.
- Weight Limit: Do not overload beyond the recommended capacity.
- Disclaimer: Manufacturer not responsible for damage due to improper use.
- Maintenance: Regular checks and maintenance required for optimal performance.
- Child Safety: Keep out of reach of children; contains small parts.
K2F Durable Nylon Block Board Fishing Kayak Trolling Motor Mounting DIY Accessories [Delivered]
K2F Durable Nylon Block Board Fishing Kayak Trolling Motor Mounting DIY Accessories
Introducing the K2F Durable Nylon Block Board Fishing Kayak Trolling Motor Mounting DIY Accessories! This compact, lightweight block board is a must-have for any kayak or fishing boat enthusiast. Made from reinforced nylon, it provides exceptional durability while ensuring easy trolling motor assembly.
This block board offers convenience without compromising on strength. Its sleek design allows seamless integration with your watercraft, making it an essential accessory for mounting motors to enhance your boating experience.
Whether you're exploring new waters or enjoying a relaxing day out on the lake, our durable nylon block board has got you covered! It's suitable for kayaks, fishing boats, and canoes - perfect if you love exploring nature surrounded by serene waters.
Investing in this high-quality product from Kayaks2Fish gives you peace of mind, knowing that your trolling motor will be securely mounted whenever you hit the water. Say goodbye to wobbly installations and hello to smooth sailing!
Take advantage of enhancing your boating adventures efficiently - get yourself the K2F Durable Nylon Block Board Fishing Kayak Trolling Motor Mounting DIY Accessories today!
Features:
- Reinforced Construction: Built with durable nylon for long-lasting use.
- Compact Design: Sleek and space-saving, perfect for smaller watercraft.
- Wide Compatibility: Suitable for kayaks, fishing boats, and canoes.
- DIY Friendly: Designed for easy self-installation, no professional help needed.
- Motor Mounting Efficiency: Enhances the stability and performance of trolling motors.
- User Convenience: Simplifies the process of attaching a motor to your boat.
- Enhanced Boating Experience: Makes motorized kayaking accessible and enjoyable.
Specifications:
- Brand: Kayaks2Fish
- SKU: K2F-MOTOBLOCK-V
- MPN: K2F-MOTOBLOCK-V
- Material: Reinforced nylon
- Length: 185 mm
- Width: 75 mm
- Height: 30 mm
- Weight: 400 gm
- Compatibility: Suitable for kayaks, fishing boats, canoes
Package Includes:
- 1 x Durable Nylon Block Board for Trolling Motor Mounting
Warning & Disclaimer:
- Installation Caution: Ensure proper installation to avoid equipment failure.
- Weight Limit Warning: Do not exceed recommended weight limits for safe operation.
- Material Sensitivity: Avoid excessive exposure to direct sunlight to prevent material degradation.
- Compatibility Check: Confirm compatibility with your specific kayak or boat model before installation.
- Water Exposure: Although water-resistant, prolonged exposure to water may affect the product's durability.
- DIY Installation: Follow instructions carefully, improper installation may lead to damage or injury.
- Disclaimer: Manufacturer is not responsible for damage or injury resulting from incorrect installation or misuse.
- Additional Note: Regularly inspect the accessory for signs of wear and tear.